6473-455 ClearRay Oxidizing Shock 2.2lbs
An Effective Shock Oxidizing Treatment
Principal Functioning Agent: Potassium Monopersulfate: * 32.18% Constituents Ineffective as Adjuvants 67.82%
*Equivalent to 3.26 active oxygen
ClearRay Oxidizing Shock is a powerful oxygen-based oxidizer. When used regularly, this product will help reduce contaminants introduced by bathers and environmental factors like rain and wind. This product will not raise chlorine levels or product combined chlorine. This product is gentle on spa surfaces. This product restores sparkle and clarity to spa water. It will not increase calcium hardness or stabilizer levels. This product contains no chlorine or other disinfectants.
Directions for Use: This product is not a sanitizer or algaecide. For routine disinfection of pool water or algae control, use an EPA registered product according to its label instructions. For routine control of microorganisms in spa or hot tub water, use an EPA registered product according to its label instructions.
When to Add ClearRay Oxidizing Shock to Your Spa: Add this product to spa water after every use, or once per week if the spa is not being used.
How to Use ClearRay Oxidizing Shock to Keep Spa Water Crystal Clear:
- Every time the spa is used, it must be oxidizer. After every use, add 2 o. of this product per 300 gallons of water.
NOTE: Apply the required amount of this product evenly throughout the spa with the pump running. Add the full amount at one time using a clean and dry plastic scoop.
- Run the pump for at least 30 minutes
- Turn the jets on and off once or twice after adding this product to improve the treatment.
Please note they use this bottle for most products, the fill line differs pending the product weight.
