Sirona® Spa Up 2lb
CLICK HERE TO OPEN THE SIRONA SPA CARE GUIDE FOR FURTHER INSTRUCTIONS/INFORMATION.
The Sirona Spa Care Spa Up is a safe and efficient spa balancer that will effectively raise the level of pH in spa water. This granular balancer will gradually increase the pH level in spa water, and it will also help prevent the corrosion of equipment, and scale formation. Sirona Spa Up is compatible with all sanitizers including bromine, chlorine, and biguanide. Use this product to safely maintain a proper pH level.
- Raises pH & Alkalinity of spa water
- Reduces the chance of equipment corrosion
- Increase the effectiveness of the sanitizer
Dosage:
If the pH level is between 6.8-7.2, add 1 ounce (2 tablespoon) per every 500 gallons of spa water. If the pH level is under 6.8, add 2 ounces (4 tablespoon) per every 500 gallons of spa water.
Directions:
Sirona Spa Care Spa Up should be used when the pH level is below 7.2. If the pH level is between 6.8-7.2, add 1 ounce (2 tablespoon) per every 500 gallons of spa water. If the pH level is under 6.8, add 2 ounces (4 tablespoon) per every 500 gallons of spa water.
- 1. Determine amount of Sirona Spa Care Spa Up to use.
- 2. Make sure equipment is turned off.
- 3. Add the appropriate amount of Sirona Spa Care Spa Up to the spa water.
- 4. Turn on circulation system for 1-3 hours.
- 5. Retest the water after 3 hours.
- 6. If the pH is still below 7.2, repeat steps 1-5.
Ingredients
Sodium Bicarbonate: 100%
