Sirona® Simply Sanitizer 16oz
CLICK HERE TO OPEN THE SIRONA SPA CARE GUIDE FOR FURTHER INSTRUCTIONS/INFORMATION.
The Sirona Simply Spa Care Sanitizer is the third step in the Sirona Spa Care Simply 3-Step System. This product sanitizes the water as well as protects against staining and discoloration due to metals.
- Step 3 in the 3-part system
- Highly stable chlorine-free, bromine free, EPA regulated sanitizer
- Provides excellent bacteria control
- Used at start-up, then added as needed per the Sirona® Simply test strips upon water testing weekly
This replaces the Baqua Spa Sanitizer product that has been discontinued by the manufacturer. Baqua Spa is only available while supplies last!
Start-Up:
Add 1 oz of this product per 150 gallons of spa water of Sirona Spa Care Simply Sanitizer to give a concentration of 50 ppm.
Maintenance:
Add 0.2 oz of this product per 150 gallons of spa water of Sirona Spa Care Simply Sanitizer to give a concentration of 10 ppm.
Directions:
Start Up:
Important - Sirona Spa Care Simply Sanitizer is incompatible with chlorinating and brominating chemical products.
- Remove chlorine or bromine source and disconnect feeder. Discontinue use of ionizers and electro chlorinators if present.
- Drain existing water in spa or hot tub.
- Clean spa surface and filter.
- Fill spa with water.
- Have your authorized Sirona Spa Care dealer check your water for proper water balance.
- After water has been balanced, add Sirona Spa Care Simply Sanitizer to give a concentration of 50 ppm (1 oz of product per 150 gallons of spa water).
- Circulate water 15 minutes then check Sirona Spa Care Simply Sanitizer concentration with Sirona Spa Care Simply Test Strips and adjust if necessary.
- Every week, check Sirona Spa Care Simply Sanitizer concentration and pH. Adjust if necessary.
- When the level of Sirona Spa Care Simply Sanitizer is 30 ppm or less, add enough Sirona Spa Care Simply Sanitizer to bring the level up to 50 ppm. The spa's level of Sirona Spa Care Simply Sanitizer should never be allowed to drop below 30 ppm. To raise the Sirona Spa Care Simply Sanitizer level 10 ppm, add 0.2 fl oz per 150 gallons of spa water.
Normal Spa Maintenance:
Ingredients:
Poly(hexamethylenebiguanide) hydrochloride: 20%
Other Ingredients: 80%
