SeaKlear System Flush for Spas 1 pt.
SeaKlear Spa System Flush super-cleans plumbing systems of hot tubs and whirlpool surfaces.
- Can be used on all spas and whirlpool surfaces.
- Removes oily residues and deposits quickly and easily.
- Great for jetted tubs.
Do not open air controls while cleaning!
Directions for Whirlpool Baths:
- Pour 1/4 cup (2 oz.) of System Flush into tub filled with hot water
- Turn pump/timer on for 10 minutes with air controls closed
- Drain and rinse with clean water
- Repeat the procedure monthly or as required
Directions for spas and hot tubs:
- Remove filter cartridge
- Pour 1/2 bottle (8 oz.) of System Flush per 400 gallons of water into spa or hot tub before draining (4 tablespoons per 100 gallons)
- Turn pump on at high speed for one hour with air controls closed
- Drain and resume normal maintenance procedures
- Repeat this procedure every 2-3 months or as required
