FROG JumpH pH Increaser 2lb
Increases pH
How to increase pH in your hot tub.
Use FROG JumpH!
Water Care Made Simple — FROG TruDose Cap™
The TruDose Cap on FROG JumpH will make you jump for joy! It makes dosing easy! The TruDose Cap seals the bottle tightly and it’s always ready for action. You’ll never look for a measuring spoon or cup again. Built-in measurements make accuracy a certainty. The TruDose Cap makes adding FROG JumpH truly effortless!

SIMPLY:
POUR
into the FROG TruDose Cap

MEASURE
with the built-in markings

DOSE
into the water

FROG JumpH: Step-by-Step User Guide
Step 1:
Test water weekly with FROG® Test Strips (or FROG @ease® Test Strips if using FROG @ease) to monitor the pH.
Step 2:
Ensure the Total Alkalinity is in the ideal range, 80-120 ppm, before adjusting the pH level.
Step 3:
If pH is low, use the chart on FROG JumpH to determine how much to add using the TruDose Cap.
Step 4:
With the jets on, pour FROG JumpH into the hot tub when not occupied. Run the jets for 30 minutes. Keep the hot tub cover off while the jets are running.
Step 5:
After 2 hours, retest and repeat steps 2-4 until the water is in the ideal pH range of 7.2-7.6.


                    
                    