Sirona® Activate Granular 5lb
CLICK HERE TO OPEN THE SIRONA SPA CARE GUIDE FOR FURTHER INSTRUCTIONS/INFORMATION.
The Sirona Spa Care Activate Granular is an efficient non-chlorine shock oxidizer that will quickly clear up cloudy spa water, while simultaneously ridding the water of unpleasant odors and contaminants. This shock oxidizer will eliminate odor causing ammonia and chloramines, as well as residual soaps and oils, which results in refreshing and clean water for spa bathers to enjoy. The Sirona Activate Granular is not a disinfectant, and will still require chlorine, bromine, or other sanitizers to properly sanitize the water.
- Step 2 or 2-step Sirona® Enhance and Activate sanitizing system
- Converts sodium bromide into active bromine in the water
- Can also be used as shock oxidizer with other bromine or chlorine systems
Dosage:
For Use as a Shock Oxidizer:
Apply 2 ounces (4 tablespoons) of this product for every 250 gallons of water.
When used as part of the Sirona Spa Care Bromide Salt Solution and Sirona Spa Care Activate System:
Apply 4 ounces (8 tablespoons) of this product for every 250 gallons of water.
Directions:
For Use as a Shock Oxidizer:
- 1. Turn the filtration system on.
- 2. Apply 2 ounces (4 tablespoons) of this product for every 250 gallons of water.
- 3. Circulate water for 15 minutes with the cover off.
When used as part of the Sirona Spa Care Bromide Salt Solution and Sirona Spa Care Activate System:
This product should be added when the spa or hot tub is initially filled and then daily as a shock oxidizer and activator to produce available bromine in water. The Sirona Activate Granular is not a disinfectant, and will still require chlorine, bromine, or other sanitizers to properly sanitize the water.
- 1. Treat the water with Sirona Spa Care Prevent stain and scale treatment and Sirona Spa Care Enhance Bromide Salt Solution according to the label directions.
- 2. Apply 4 ounces of (8 tablespoons) of this product for every 250 gallons of water to shock oxidize the spa or hot tub and to release available bromine.
- 3. Test the bromine residual with a bromine/pH test kit after this product has been added and allowed to circulate for 15 minutes. The residual must be maintained between 1-3 ppm.
- 1. Test the pH of the water daily with a bromine/pH test kit daily and maintain the pH level between 7.2-7.8 because the pH of this product is buffered in this range and will not adversely affect the pH of the water. Do not allow the pH to fall below 7.2.
- 2. Test the bromine residual daily with a bromine/pH test kit. The bromine residual must be between 1-3 ppm. Heavy usage or the length of time the spa or hot tub is in use may result in depletion of bromine and require additional dosages of this product and/or Sirona Spa Care Enhance Bromide Salt Solution to maintain the desired bromine residual. Never mix any chemicals with each other before adding to the spa or hot tub water.
- 3. Change the water monthly or as needed to maintain water quality.
For Maintenance of pH, Bromine Residual and Water Quality:
- Test the pH of the water daily with a bromine/pH test kit daily and maintain the pH level between 7.2-7.8 because the pH of this product is buffered in this range and will not adversely affect the pH of the water. Do not allow the pH to fall below 7.2.
- Test the bromine residual daily with a bromine/pH test kit. The bromine residual must be between 1-3 ppm. Heavy usage or the length of time the spa or hot tub is in use may result in depletion of bromine and require additional dosages of this product and/or Sirona Spa Care Enhance Bromide Salt Solution to maintain the desired bromine residual. Never mix any chemicals with each other before adding to the spa or hot tub water.
- Change the water monthly or as needed to maintain water quality.
Ingredients
Potassium Peroxymonosulfate*: 32.2%
Other Ingredients: 67.8%
*Equivalent 3.26% Active Oxygen
Ingredients
Potassium Peroxymonosulfate*: 32.2%
Other Ingredients: 67.8%
*Equivalent 3.26% Active Oxygen
