6600-730 formerly 6600-028 Sundance Spas Circuit Board FREE SHIPPING AND HANDLING
THIS BOARD USED ON 880/850 SERIES (EXCEPT MAXXUS AND ASPEN) PRIOR TO WATERFALL AND HI FLOW CIRC PUMP AND OLDER JACUZZI J-300 SERIES BELOW
6600-730 formerly 6600-028, 1997-2005 850 systems, 1 and 2-pump with PermaClear (EPROM Rev. 1.28GX+ included), for all Sundance Spas models except Maxxus.
Used on the following Sundance® Spas:
- 1997-2000 850 Sundance®
- 2005-2008 (Spring) 880 Sundance® PRIOR to WATERFALL and HI FLOW CIRC (MUST HAVE 6000-125)
- 2008-04/2009 880 Sundance® (started approx. Spring of 2008, for MJ, AL, MR, CP models). Changed to 6600-390 board as of 05/09. Visual inspection of the board must be made to determine the correct part needed. Not Interchangeable
- 02/2012+ 880 Sundance® except Maxxus/Aspen
- 2001 850 Sundance® NT (1 speed air blower only)
- 2002-2005 Sundance® NT (1 speed air blower only)
Used on the following Jacuzzi® Hot Tubs:
- 2002-2006 J-375, J-370, J-365, J-365, J-355, J-350
Processor 4.0D higher with PermaClear/UV counter/Indicator Light for 880 models except Maxxus and Aspen.
Replaced 6600-180 (2-Spd 1-Pmp) - Service part
This board replaced:
6600-028
6600-056
6600-092
6600-161
Note: 6600-017, 6600-018, 6600-023, 6600-028, are the same boards with different EPROMs.
Spa covers, filter cartridges that are used or have been wet, spa equipment packs, heaters and any electrical items (including but not limited to: circuit boards, spa control panels, contactors, switches, sensors, speakers, transformers, pumps and motors) are a FINAL SALE. Manufacturer's warranty still applies and can be returned for warranty only. Maximum manufacturer's warranty on electronics is 6 months.